Jump to content

टेम्पलेट:Infobox military installation

विकिपीडिया से


Loring Air Force Base
Limestone Air Force Base
Limestone and Caswell, Maine in United States
Aerial image of Loring Air Force Base, in black and white
USGS 1970 Aerial Photo
Shield with an sword with wings coming out of it
Logo of Air Combat Command
Loring AFB  (KLIZ)  is located in Maine
Loring AFB  (KLIZ) 
Loring AFB 
Location of Loring AFB
Coordinates46°56′59″N 67°53′20″W / 46.94972°N 67.88889°W / 46.94972; -67.88889
TypeAir Force Base
Area9,000 एकड़ (3,600 हे; 14 वर्ग मील)
Site information
OwnerUnited States Air Force
Operator42nd Bomb Wing
Controlled by यूनाइटेड स्टेट्स एयर फोर्स
Open to
the public
StationsCaribou Air Force Station (East Loring), Caswell Air Force Station
Site history
Built1947 (1947)–1953
Built byUnited States Army Corps of Engineers
In use1950–1994 (1994)
FateMainly intact, partial demolition
EventsCold War
Garrison information
Robert J. Pavelko
Garrison42nd Bomb Wing
Occupants69th Bombardment Squadron, 70th Bombardment Squadron, 75th Bombardment Squadron, 42d Air Refueling Squadron, 407th Air Refueling Squadron, 2192nd Communications Squadron, 101st Fighter Squadron
Airfield information
IdentifiersIATA: KLIZ, ICAO: LIZ
Elevation746 फीट (227 मी) AMSL
Direction Length and surface
1R/19L 12,100 फीट (3,688 मी) Asphalt/Concrete
1L/19R 12,800 फीट (3,901 मी) Asphalt

A military installation infobox may be used to summarize information about a military structure or facility, such as a fortification or military base.

The infobox should be added using the {{Infobox military installation}} template, as shown below:

{{Infobox military installation
| name = 
| ensign = 
| ensign_size =
| native_name = 
| partof = <!-- for elements within a larger site -->
| location = 
| nearest_town = <!-- used in military test site infobox -->
| country = 
| image = 
| alt = 
| caption = 
| image2 = <!--secondary image, major command emblems for airfields -->
| alt2 = 
| caption2 = 
| type = 
| coordinates = <!-- {{Coord}} -->
| gridref = 
| image_map = 
| image_mapsize = 
| image_map_alt = 
| image_map_caption = 
| pushpin_map = 
| pushpin_mapsize = 
| pushpin_map_alt = 
| pushpin_map_caption = 
| pushpin_relief = 
| pushpin_image = 
| pushpin_label = 
| pushpin_label_position = 
| pushpin_mark = 
| pushpin_marksize = 
| ownership = <!-- government department such as the MoD or the United States DoD -->
| operator = <!-- where different from ownership such as the RAF or the USAF -->
| controlledby = <!-- such as RAF Bomber Command or the Eighth Air Force -->
| open_to_public = <!-- for out of use sites/sites with museums etc -->
| site_other_label = <!-- for renaming "Other facilities" in infobox -->
| site_other = <!-- for other sorts of facilities - radar types etc -->  
| site_area = <!-- area of site m2, km2 square mile etc -->
| code = <!--facility/installation code, applies to US -->
| built = <!-- {{Start date|YYYY}} -->
| used = <!--{{End date|1946}} -->
| builder = 
| materials = 
| height = <!-- height of tallest part, not above sea level -->
| length = <!-- for border fences or other DMZs -->
| fate = <!--changed from demolished parameter-->
| condition = 
| battles = 
| events = 
| current_commander = <!-- current commander -->
| past_commanders = <!-- past notable commander(s) -->
| garrison = <!-- such as the 25th Bombardment Group -->
| occupants = <!-- squadrons only -->
| website = 
| footnotes = <!-- catchall in case it's needed to preserve something in infobox that doesn't work in new code -->

The following supplemental blocks may be copied into the template above as needed, just prior to the "footnotes" parameter.

Test sites
<!-- begin test site information -->
| subcritical_tests = 
| nuclear_tests = 
| thermonuclear_tests = 
| other_tests_label = <!-- changed from "Other tests" to wording of your choice --> 
| other_tests = 
| remediation = 
| image3 = 
| alt3 = 
| caption3 = 
<!--  end test site information  -->
<!-- begin airfield information  -->
| IATA = 
| ICAO = 
| FAA = 
| TC = 
| LID = 
| GPS = 
| WMO = 
| elevation = <!-- {{Convert| |m|0}} -->
| r1-number = 
| r1-length = <!-- {{Convert| |m|0}} -->
| r1-surface = 
| h1-number = 
| h1-length = <!-- {{Convert| |m|0}} -->
| h1-surface = 
| airfield_other_label = <!-- for renaming "Other facilities" in infobox -->
| airfield_other = <!-- for other sorts of airfield facilities -->
<!--  end airfield information   -->

Parameters[संपादन करीं]

Note: When using parameters, avoid the ambiguous abbreviation "N/A", and instead use "unknown" or "none". If a parameter is not applicable, leave it blank and it will not be displayed. All subjective or qualitative judgements and numerical quantities or statistics must be cited to a reliable source (see WP:MILMOS#CITE).

  • name – the name of the installation or structure.
  • ensignoptional – a small ensign image used by the installation.
  • engign_size - optional - size for ensign image.
  • native_nameoptional – the name of the installation in the language(s) of the country which built it, or in which it is located.
  • partofoptional – the larger complex the given installation is part of, if any. For proper grammar, it may be necessary to insert "the" before the name used here.
  • location – the geographical location of the installation.
  • imageoptional – an image of the installation. The image must be given in the form [[File:Example.jpg|300px]]; in particular, the thumb attribute must not be selected.
  • captionoptional – the text to be placed below the image.
  • map_typeoptional – the base map to be used for the location map, e.g., "Scotland"; see {{Location map}} for more details.
  • map_reliefoptional – set to any non-blank value to use a relief map (if available).
  • coordinatesoptional – latitude and longitude for placing the marker on the location map. Use {{Coord}}; see the Coord template documentation for details.
  • gridrefoptional - map grid reference.
  • map_sizeoptional – width of the location map in pixels (px), e.g., "150"; defaults to "220".
  • map_altoptional – alt text for location map; see Wikipedia:Alternative text for images.
  • map_captionoptional – caption displayed below the location map; defaults to "Shown within {{{map_type}}}", e.g., "Shown within Scotland".
  • typeoptional – the general type of installation ("Castle", "Fortress", "Bunker", "Military base", "Wall", "Defensive line", etc.).
  • codeoptional – the location or facility code, such as the ILC or ILK code.
  • builtoptional – the date when the installation was built, usually given in years. Use {{start date}} if 1583 or later.
  • builderoptional – the person or group responsible for building the installation.
  • materialsoptional – the materials used to construct the installation.
  • heightoptional – where relevant (e.g. for towers), the height of the installation.
  • lengthoptional – where relevant (e.g. for fences and DMZs), the length of the installation.
  • floor_areaoptional – where relevant (e.g. for buildings), the interior floor area of the installation.
  • site_areaoptional – where relevant (e.g. for compounds), the land area of the installation.
  • usedoptional – the period during which the installation was in active military use, usually given in years.
  • demolishedoptional – the date when the installation was demolished, if applicable.
  • conditionoptional – the current condition of the installation.
  • ownershipoptional – the current owner of the installation, if relevant.
  • open_to_publicoptional – whether the installation is currently open to the general public, if relevant; indicated by "yes" or "no".
  • controlledbyoptional – the country or other power controlling the installation. Multiple powers may be indicated together with the corresponding dates.
  • garrisonoptional – the military forces garrisoning the installation. Specific units may be indicated if known; general numbers should be given otherwise.
  • current_commanderoptional – for installations currently in military use, the current commanding officer.
  • past_commandersoptional – any notable individuals that commanded the forces using this installation; the choice of which commanders qualify as notable is left to the editors of a particular article.
  • occupantsoptional – any notable occupants of the installation other than its commanders; as above, the choice of which occupants qualify as notable is left to the article editors.
  • battlesoptional – any notable battles (usually sieges) that took place in or are closely associated with the installation; as above, the choice of which battles qualify as notable is left to the article editors.
  • eventsoptional – any notable non-battle events that took place in or are closely associated with the installation; as above, the choice of which events qualify as notable is left to the article editors.
  • image2optional – a second image of the installation. The image must be given in the form [[File:Example.jpg|300px]]; in particular, the thumb attribute must not be selected.
  • caption2optional – the text to be placed below the second image.


The HTML mark up produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia.

Sub-templates[संपादन करीं]

If the place or venue has an "established", "founded", "opened" or similar date, use {{start date}} unless the date is before 1583 CE.

If it has a URL, use {{URL}}.

Please do not remove instances of these sub-templates.

Classes[संपादन करीं]

hCard uses HTML classes including:

  • adr
  • agent
  • category
  • county-name
  • extended-address
  • fn
  • label
  • locality
  • nickname
  • note
  • org
  • region
  • street-address
  • uid
  • url
  • vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

  • geo
  • latitude
  • longitude

Please do not rename or remove these classes nor collapse nested elements which use them.

Precision[संपादन करीं]

When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter.

Tracking category

इहो देखल जाय