Jump to content

टेम्पलेट:Infobox military installation/doc

कड़ी जोड़ीं
विकिपीडिया से

टेम्पलेट:Highuse

Usage

[संपादन करीं]
Loring Air Force Base
Limestone Air Force Base
Limestone and Caswell, Maine के लगे in United States
Aerial image of Loring Air Force Base, in black and white
USGS 1970 Aerial Photo
Shield with a sword with wings coming out of it
Logo of Air Combat Command
साइट जानकारी
प्रकारAir Force Base
मालिकUnited States Air Force
ऑपरेटर42nd Bomb Wing
Open to the public
Yes
Stations
Caribou Air Force Station (East Loring), Caswell Air Force Station
लोकेशन जानकारी
Loring AFB is located in Maine
Loring AFB
Loring AFB
Shown within Maine
Loring AFB is located in USA
Loring AFB
Loring AFB
Loring AFB (USA)
अक्षांस-देशांतर46°56′59″N 67°53′20″W / 46.94972°N 67.88889°W / 46.94972; -67.88889
रकबा9,000 एकड़ (3,600 हे; 14 वर्ग मील)
साइट के इतिहास
निर्माण1947 (1947)–1953
निर्माणकर्ताUnited States Army Corps of Engineers
In use1950–1994 (1994)
FateMainly intact, partial demolition
घटनाCold War
गैरिसन जानकारी
Current commander
Robert J. Pavelko
Garrison42nd Bomb Wing
निवासी69th Bombardment Squadron, 70th Bombardment Squadron, 75th Bombardment Squadron, 42d Air Refueling Squadron, 407th Air Refueling Squadron, 2192nd Communications Squadron, 101st Fighter Squadron
Airfield information
IdentifiersIATA: KLIZ, ICAO: LIZ
Elevation746 फीट (227 मी) AMSL
Runways
Direction Length and surface
1R/19L 12,100 फीट (3,688 मी) Asphalt/Concrete
1L/19R 12,800 फीट (3,901 मी) Asphalt

A military installation infobox may be used to summarize information about a military structure or facility, such as a fortification or military base.

The infobox should be added using the {{Infobox military installation}} template, as shown below:

{{Infobox military installation
| name                   = 
| ensign                 = 
| ensign_size            = 
| native_name            = 
| partof                 = <!-- for elements within a larger physical site -->
| location               = 
| nearest_town           = <!-- formerly used in military test site infobox -->
| country                = 
| image                  = 
| alt                    = 
| caption                = 
| image2                 = <!--secondary image, major command emblems for airfields -->
| alt2                   = 
| caption2               = 
| coordinates            = <!-- {{Coord}} -->
| gridref                = 
| type                   = 
| image_map              = 
| image_mapsize          = 
| image_map_alt          = 
| image_map_caption      = 
| pushpin_map            = 
| pushpin_mapsize        = 
| pushpin_map_alt        = 
| pushpin_map_caption    = 
| pushpin_relief         = 
| pushpin_image          = 
| pushpin_label          = 
| pushpin_label_position = 
| pushpin_mark           = 
| pushpin_marksize       = 
| mapframe               = <!-- see below for more mapframe parameters -->
| code                   = <!--facility/installation code -->
| site_area              = <!-- area of site m2, km2 square mile etc. -->
| floor_area             = 
| height                 = <!-- height of tallest part, not above sea level -->
| length                 = <!-- for border fences or other DMZs -->
| ownership              = <!-- government department such as the MoD or the United States DoD -->
| operator               = <!-- where different from ownership such as the RAF or the USAF -->
| controlledby           = <!-- such as RAF Bomber Command or the Eighth Air Force -->
| open_to_public         = <!-- for out of use sites/sites with museums etc. -->
| condition              = 
| site_other_label       = <!-- for renaming "Other facilities" in infobox -->
| site_other             = <!-- for other sorts of facilities – radar types etc. -->  
| website                = 
| built                  = <!-- {{Start date|YYYY}} -->
| built_for              = 
| builder                = 
| architect              = 
| used                   = <!--{{End date|1946}} -->
| materials              = 
| fate                   = <!--changed from demolished parameter-->
| demolished             = 
| battles                = 
| events                 = 
| current_commander      = <!-- current commander -->
| past_commanders        = <!-- past notable commander(s) -->
| garrison               = <!-- such as the 25th Bombardment Group -->
| occupants              = <!-- squadrons only -->
| designations           = 
| nrhp                   = 
| footnotes              = <!-- catchall in case it's needed to preserve something in infobox that doesn't work in new code -->
}}

The following supplemental blocks may be copied into the template above as needed, just prior to the "footnotes" parameter.

Test sites

<!-- begin test site information -->
| subcritical_tests   = 
| nuclear_tests       = 
| thermonuclear_tests = 
| other_tests_label   = <!-- changed from "Other tests" to wording of your choice --> 
| other_tests         = 
| remediation         = 
| image3              = 
| alt3                = 
| caption3            = 
<!--  end test site information  -->

Airfields

<!-- begin airfield information  -->
| IATA                 = 
| ICAO                 = 
| FAA                  = 
| TC                   = 
| LID                  = 
| GPS                  = 
| WMO                  = 
| elevation            = <!-- {{Convert| |m|0}} -->
| r1-number            = 
| r1-length            = <!-- {{Convert| |m|0}} -->
| r1-surface           = 
| h1-number            = 
| h1-length            = <!-- {{Convert| |m|0}} -->
| h1-surface           = 
| airfield_other_label = <!-- for renaming "Other facilities" in infobox -->
| airfield_other       = <!-- for other sorts of airfield facilities -->
<!--  end airfield information   -->

Parameters

[संपादन करीं]

Note: When using parameters, avoid the ambiguous abbreviation "N/A", and instead use "unknown" or "none". If a parameter is not applicable, leave it blank and it will not be displayed. All subjective or qualitative judgements and numerical quantities or statistics must be cited to a reliable source (see WP:MILMOS#CITE).

  • name – the name of the installation or structure, must be identical to article name.
  • ensign – optional – a small ensign image used by the installation's operator.
  • ensign_size – optional – size for ensign image.
  • native_name – optional – the name of the installation in the language(s) of the country which built it, or in which it is located.
  • partof – optional – the larger physical complex the given installation is part of, if any. For proper grammar, it may be necessary to insert "the" before the name used here.
  • location – the geographical location of the installation. Not to be used alongside "nearest_town".
  • nearest_town - the nearest town to the installation. Not to be used alongside "location".
  • image – optional – an image of the installation. The image should be given in the form Example.jpg; other values can be inserted in the following parameters.
  • image_size – optional – width of the image in pixels (px), e.g., "150"; defaults to "220".
  • alt – optional – alt text for the image; see Wikipedia:Alternative text for images.
  • caption – optional – the text to be placed below the image.
  • image2 – optional – a second image of the installation. The image should be given in the form Example.jpg; other values can be inserted in the following parameters.
  • image2_size – optional – width of the second image in pixels (px), e.g., "150"; defaults to "220".
  • alt2 – optional – alt text for the second image; see Wikipedia:Alternative text for images.
  • caption2 – optional – the text to be placed below the second image.
  • map_type – optional – the base map to be used for the location map, e.g., "Scotland"; see {{Location map}} for more details.
  • map_relief – optional – set to any non-blank value to use a relief map (if available).
  • map_size – optional – width of the location map in pixels (px), e.g., "150"; defaults to "220".
  • map_alt – optional – alt text for location map; see Wikipedia:Alternative text for images.
  • map_caption – optional – caption displayed below the location map; defaults to "Shown within {{{map_type}}}", e.g., "Shown within Scotland".
  • coordinates – optional – latitude and longitude for placing the marker on the location map. Use {{Coord}}; see the Coord template documentation for details.
  • gridref – optional – map grid reference.
  • type – optional – the general type of installation ("Air base", "Castle", "Fortress", "Bunker", "Military base", "Wall", "Defensive line", etc.).
  • code – optional – the location or facility code, such as the ILC or ILK code.
  • site_area – optional – where relevant (e.g. for compounds), the land area of the installation.
  • floor_area – optional – where relevant (e.g. for buildings), the interior floor area of the installation.
  • height – optional – where relevant (e.g. for towers), the height of the installation.
  • length – optional – where relevant (e.g. for fences and DMZs), the length of the installation.
  • ownership – optional – the owner of the installation.
  • operator – optional – where different from ownership.
  • controlledby – optional – the organisation controlling the installation. Multiple powers may be indicated together with the corresponding dates.
  • open_to_public – optional – whether the installation is currently open to the general public, if relevant; indicated by "yes" or "no".
  • condition – optional – the current condition of the installation.
  • built – optional – the date when the installation was built, usually given in years. Use {{start date}} if 1583 or later.
  • builder – optional – the person or group responsible for building the installation.
  • used – optional – the period during which the installation was in active military use, usually given in years.
  • materials – optional – the materials used to construct the installation.
  • demolished – optional – the date when the installation was demolished, if applicable.
  • battles – optional – any notable battles (usually sieges) that took place in or are closely associated with the installation; as above, the choice of which battles qualify as notable is left to the article editors.
  • events – optional – any notable non-battle events that took place in or are closely associated with the installation; as above, the choice of which events qualify as notable is left to the article editors.
  • current_commander – optional – for installations currently in military use, the current commanding officer.
  • past_commanders – optional – any notable individuals that commanded the forces using this installation; the choice of which commanders qualify as notable is left to the editors of a particular article.
  • garrison – optional – the military forces garrisoning the installation. Specific units may be indicated if known; general numbers should be given otherwise.
  • occupants – optional – any notable occupants of the installation other than its commanders; as above, the choice of which occupants qualify as notable is left to the article editors.
  • designations optional – legal heritage protection status
  • module – optional – to embed other templates beneath this one.
  • embed – optional – to embed this template into another above it.

Mapframe maps

[संपादन करीं]
  • Basic parameters:
    • mapframe – Specify yes or no to show or hide the map, overriding the default. Default: no
    • mapframe-caption – Caption for the map. Default: blank (or if |mapframe-geomask= is set, "Location in geomask's label")
    • mapframe-custom – Use a custom map instead of the automatic mapframe. Specify either a {{maplink}} template, or another template that generates a mapframe map, or an image name. If used, the subsequent mapframe parameters will be ignored. Default: not specified
    • mapframe-id or id or qid – Id (Q-number) of Wikidata item to use. Default: item for current page
    • mapframe-coordinates or mapframe-coord or coordinates or coord – Coordinates to use, instead of any on Wikidata. Use the {{Coord}} template, e.g. |coord={{Coord|12.34|N|56.78|E}}. Default: coordinates from Wikidata
    • mapframe-wikidata – Set to yes to show shape/line features from the wikidata item, if any, when |coord= is set. Default: not specified
  • Customise which features are displayed:
    • mapframe-shape – Turn off display of shape feature by setting to none. Use an inverse shape (geomask) instead of a regular shape by setting to inverse. Default: not specified
    • mapframe-point – Turn off display of point feature by setting to none. Force point marker to be displayed by setting to on. Default: not specified
    • mapframe-line – Turn off display of line feature by setting to none. Default: not specified
    • mapframe-geomask – Wikidata item to use as a geomask (everything outside the boundary is shaded darker). Can either be a specific Wikidata item (Q-number), or a property that specifies the item to use (e.g. P17 for देश (P17), P131 for 𑂔𑂸𑂢𑂰 𑂣𑂹𑂩𑂬𑂰𑂮𑂢𑂱𑂍 𑂅𑂍𑂰𑂆 𑂧𑂵𑂁 𑂣𑂙𑂵 𑂪𑂰 (P131)). Default: observation-tower
    • mapframe-switcher – set to auto or geomasks or zooms to enable Template:Switcher-style switching between multiple mapframes. Default: not specified
  • Other optional parameters:
    • mapframe-frame-width or mapframe-width – Frame width. Default: 250
    • mapframe-frame-height or mapframe-height – Frame height. Default: 200
    • mapframe-shape-fill – Color used to fill shape features. Default: #606060
    • mapframe-shape-fill-opacity – Opacity level of shape fill, a number between 0 and 1. Default: 0.5
    • mapframe-stroke-color or mapframe-stroke-colour – Color of line features, and outlines of shape features. Default: #ff0000
    • mapframe-stroke-width – Width of line features, and outlines of shape features; default is "5". Default: 5
    • mapframe-marker – Marker symbol to use for coordinates; see mw:Help:Extension:Kartographer/Icons for options. Default: observation-tower
      • Can also be set to blank to override any default marker symbol
    • mapframe-marker-color or mapframe-marker-colour – Background color for the marker. Default: #5E74F3
    • mapframe-geomask-stroke-color or mapframe-geomask-stroke-colour – Color of outline of geomask shape. Default: #555555
    • mapframe-geomask-stroke-width – Width of outline of geomask shape. Default: 2
    • mapframe-geomask-fill – Color used to fill outside geomask features. Default: #606060
    • mapframe-geomask-fill-opacity – Opacity level of fill outside geomask features, a number between 0 and 1. Default: 0.5
    • mapframe-zoom – Set the zoom level, from "1" (map of earth) to "18" (maximum zoom in), to be used if the zoom level cannot be determined automatically from object length or area. Default: 10
    • mapframe-length_km or mapframe-length_mi or mapframe-area_km2 or mapframe-area_mi2 – Determine zoom level by passing in object's length (in kilometres or miles) or area (in square kilometres or square miles). Default: not specified
    • mapframe-frame-coordinates or mapframe-frame-coord – Alternate latitude and longitude coordinates for initial placement of map, using {{coord}}. Default: derived from item coordinates

Microformat

The HTML mark up produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia.

Sub-templates

[संपादन करीं]

If the place or venue has an "established", "founded", "opened" or similar date, use {{start date}} unless the date is before 1583 CE.

If it has a URL, use {{URL}}.

Please do not remove instances of these sub-templates.

Classes

[संपादन करीं]

hCard uses HTML classes including:

  • adr
  • agent
  • category
  • county-name
  • extended-address
  • fn
  • label
  • locality
  • nickname
  • note
  • org
  • region
  • street-address
  • uid
  • url
  • vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

  • geo
  • latitude
  • longitude

Please do not rename or remove these classes nor collapse nested elements which use them.

Precision

[संपादन करीं]

When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter.

Tracking categories

TemplateData

This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. See a monthly parameter usage report for Template:Infobox military installation in articles based on its TemplateData.

TemplateData for Infobox military installation

See also

"https://bh.wikipedia.org/w/index.php?title=टेम्पलेट:Infobox_military_installation/doc&oldid=796813" से लिहल गइल