टेम्पलेट:Convert

Template documentation[view] [edit] [history] [purge]

Template {{convert}} calculates measurements from one unit (you can enter) to another one, and then presents the results. For example:

{{convert|2|km|mi}} → 2 किलोमीटर (1.2 मील)

{{convert|7|mi|km}} → 7 मील (11 किमी)

See Help:Convert for more complete information

For currency conversion into US dollars, see Template:To USD

Units to convert

Enter units to convert:

• {{convert|1|lb|kg}} → 1 पाउंड (0.45 किग्रा)

• Units are listed below.

Unit name or symbol (abbreviation): 1 pound or 1 lb?

By default, the first value shows unit name spelled out, the second the symbol (or abbreviation). Use |abbr=on/off to change this behaviour:

• {{convert|1|lb|kg}} → 1 पाउंड (0.45 किग्रा)

To abbreviate both:

• {{convert|1|lb|kg|abbr=on}} → 1 पाउंड (0.45 किग्रा)
• {{convert|1|lb|kg|abbr=off}} → 1 पाउंड (0.45 किलोग्राम)

|abbr=in is the reverse behaviour to the default, |abbr=out:

• {{convert|1|lb|kg|abbr=in}} → 1 पाउंड (0.45 किलोग्राम)

When using scientific notation, the default is for the second (converted) value to display with scientific notation:

• {{convert|100|e6mi|e6km}} → 100 मिलियन मील (160×10^⁶ किमी)

To display thousands, millions, etc., while abbreviating both input and output units use |abbr=unit:

• {{convert|100|e6mi|e6km|abbr=unit}} → 100 मिलियन मील (160 मिलियन किमी)

Convenience: {{cvt}} has |abbr=on by default

Template {{cvt}} is similar to {{convert}}, but has |abbr=on as the default behaviour. In {{cvt}}, all other options are available. So:

{{cvt|1|lb|kg}} → 1 पाउंड (0.45 किग्रा)

is equal to:

{{convert|1|lb|kg|abbr=on}} → 1 पाउंड (0.45 किग्रा)

Adjective: a 10-mile distance

Use |adj=on to produce the adjective form:

• A {{convert|10|mi|km|adj=on}} distance → A 10-मील (16 किमी) distance.

Default behaviour, for comparison:

• {{convert|10|mi|km}} to go → 10 मील (16 किमी) to go.

This option does not work with |abbr=on.

Rounding: 100 ft is 30 m or 30.5 m or 30.48 m?

By definition, 100 ft equals 30.48 मी. In practical use, it is common to round the calculated metric number. With that, there are several possibilities.

Default rounding

By {{Convert}} default, the conversion result will be rounded either to precision comparable to that of the input value (the number of digits after the decimal point—or the negative of the number of non-significant zeroes before the point—is increased by one if the conversion is a multiplication by a number between 0.02 and 0.2, remains the same if the factor is between 0.2 and 2, is decreased by 1 if it is between 2 and 20, and so on) or to two significant figures, whichever is more precise. An exception to this is rounding temperatures (see below).

Examples of rounding
Input	Displays as	Note
{{convert|123|ft|m|-1}}	123 फीट (40 मी)
{{convert|123|ft|m}}	123 फीट (37 मी)	same output as with 0 (below)
{{convert|123|ft|m|0}}	123 फीट (37 मी)
{{convert|123|ft|m|1}}	123 फीट (37.5 मी)
{{convert|123|ft|m|2}}	123 फीट (37.49 मी)	exact value is 37.4904 m
{{convert|500|ft|m|-1}}	500 फीट (150 मी)
{{convert|500|ft|m}}	500 फीट (150 मी)	same output as with -1 (above)
{{convert|500|ft|m|0}}	500 फीट (152 मी)
{{convert|500|ft|m|1}}	500 फीट (152.4 मी)
{{convert|500|ft|m|2}}	500 फीट (152.40 मी)	exact value is 152.4 m

Convert supports four types of rounding:

Round to a given precision: use a precision number

Specify the desired precision with the fourth unnamed parameter (or third unnamed parameter if the "convert to" parameter is omitted; or fifth unnamed parameter if a range is specified; or fourth unnamed parameter again if a range is specified and the "convert to" parameter is omitted; needs to be replaced with a "precision" named parameter). The conversion is rounded off to the nearest multiple of ¹⁄₁₀ to the power of this number. For instance, if the result is 8621 and the round number is "-2", the result will be 8600. If the result is "234.0283043" and the round number is "0", the result will be 234.

Round to a given number of significant figures: |sigfig=

To specify the output number to be with n significant figures use |sigfig=<number>:

• {{convert|1200|ft|m|sigfig=4}} → 1,200 फीट (365.8 मी)
• {{convert|1200|ft|m|sigfig=3}} → 1,200 फीट (366 मी)
• {{convert|1200|ft|m|sigfig=2}} → 1,200 फीट (370 मी)
• {{convert|1200|ft|m|sigfig=1}} → 1,200 फीट (400 मी)

Default behaviour, for comparison:

• {{convert|1200|ft|m}} → 1,200 फीट (370 मी)

Setting |sigfig= is meaningless

• {{convert|1200|ft|m|sigfig=0}} → 1,200 फीट (370 मी)

Round to a multiple of 5: 15, 20, 25, ...

Using |round=5 rounds the outcome to a multiple of 5.

• {{convert|10|m|ft}} → 10 मीटर (33 फीट)
• {{convert|10|m|ft|round=5}} → 10 मीटर (35 फीट)

Similar: using |round=25 rounds the outcome to a multiple of 25.

• {{convert|10|m|ft}} → 10 मीटर (33 फीट)
• {{convert|10|m|ft|round=25}} → 10 मीटर (25 फीट)

Default behaviour, for comparison:

• {{convert|10|m|ft|sigfig=4}} → 10 मीटर (32.81 फीट)

In a range, one can round each value individually to the default. Use |round=each:

• {{convert|10 x 200 x 3000|m|ft}} → 10 बाई 200 बाई 3,000 मीटर (33 बाई 656 बाई 9,843 फीट)
• {{convert|10 x 200 x 3000|m|ft|round=each}} → 10 बाई 200 बाई 3,000 मीटर (33 बाई 660 बाई 9,800 फीट)

Round to a multiple of a given fraction: 2 ³⁄₁₆ inch

Specify the desired denominator using |frac=<some positive integer>. (Denominator is the below-the-slash number, for example the 3 in ¹⁄₃).

• {{convert|5.56|cm|in|frac=16}} → 5.56 सेंटीमीटर (2 ³⁄₁₆ इंच)
• {{convert|8|cm|in|frac=4}} → 8 सेंटीमीटर (3 ¹⁄₄ इंच)

The fraction is reduced when possible:

• {{convert|8|cm|in|frac=100}} → 8 सेंटीमीटर (3 ³⁄₂₀ इंच)

Default behaviour, for comparison:

• {{convert|8|cm|in}} → 8 सेंटीमीटर (3.150 इंच)

Rounding temperatures: °C, °F and K

In temperatures, the conversion will be rounded either to precision comparable to that of the input value or to that which would give three significant figures when expressed in kelvins, whichever is more precise.

1. {{convert|10,000|C|F K}} → 10,000 °C (18,000 °F; 10,300 K)
2. {{convert|10,000.1|C|F K}} → 10,000.1 °C (18,032.2 °F; 10,273.2 K)
3. {{convert|-272|C|F K}} → −272 °C (−457.60 °F; 1.15 K)
4. {{convert|-272|C}} → −272 °C (−457.60 °F)
5. {{convert|-300|C|F K}} → −300 °C (−508.0 °F; −26.9 K)
6. {{convert|0|C|F K}} → 0 °C (32 °F; 273 K)

The precision of the input number in example (1) is one digit, but the precision of its Kelvins expression is three, so the precision of the Fahrenheit conversion is made three (made 180...) . (1) and (2) seem to belie the fact that a 0.1 degrees Celsius change is a 0.18 degrees Fahrenheit change, and make the 32 degrees difference shown in (1) begin to seem off somehow. Result (1) seems off until you set the significant figures yourself with |sigfig=:

{{convert|10000|C|sigfig=5}} → 10,000 °C (18,032 °F)

or you set the precision positionally, relative to the decimal point (zero being at the decimal point):

{{convert|10000|C|0}} → 10,000 °C (18,032 °F)

The precision of the input number in example (2) is six, so the precision of the Fahrenheit output is, whereas before, Kelvins had determined it to be three. Examples (3) and (4) show how this can be hidden and generate questions, but it occurs there because the Kelvins conversion generated two fractional parts. (Before it was the input number that generated the fractional part.) In example (3) the three input digits converted into five significant output digits because of the two digits after the decimal point, generated by the Kelvins conversion. This happened again in (5), but in (6) decimal fractions were neither given as input nor induced by the Kelvins conversion.

Into multiple units: 10 °C (50 °F; 283 K)

Separate the multiple output units by a space:

• {{convert|10|C|F K}} → 10 °C (50 °F; 283 K)
• {{convert|5|km|mi nmi}} → 5 किलोमीटर (3.1 मील; 2.7 समु-मील)

If the output unit names contain spaces, use + as the separator.

See also:

• For multiple-unit options like 1 ft 5 in, see #In input and #In output.

Ranges of values

a conversion of a difference खातिर, § Units of difference देखल जाय।

A range converts two values and separates them by your choice of words and punctuation.

A range: 6 to 17 kg (13 to 37 lb)

Range indicators are entered as the second parameter (between the values). Range separators can be:

Range separators in {{convert}}
Separator	Convert	Result	Notes
-	{{convert|3|-|6|ft}}	3–6 फीट (0.91–1.83 मी)	Input can be hyphen (-) or en dash (–), output uses en dash
– – (en dash)	{{convert|3|–|6|ft}}	3–6 फीट (0.91–1.83 मी)
and	{{convert|3|and|6|ft}}	3 आ 6 फीट (0.91 आ 1.83 मी)
&	{{convert|3|&|6|ft}}	3 &	Same as and
and(-)	{{convert|3|and(-)|6|ft}}	3 आ 6 फीट (0.91–1.83 मी)	|abbr=on abbreviates the first unit
and(-)|abbr=on	{{convert|3|and(-)|6|ft|abbr=on}}	3 आ 6 फीट (0.91–1.83 मी)
or	{{convert|3|or|6|ft}}	3 या 6 फीट (0.91 या 1.83 मी)
to	{{convert|3|to|6|ft}}	3 से 6 फीट (0.91 से 1.83 मी)
to(-)	{{convert|3|to(-)|6|ft}}	3 से 6 फीट (0.91–1.83 मी)	|abbr=on abbreviates the first unit
to(-)|abbr=on	{{convert|3|to(-)|6|ft|abbr=on}}	3 से 6 फीट (0.91–1.83 मी)
to about	{{convert|3|to about|6|ft}}	3 to about 6 फीट (0.91 to about 1.83 मी)
+/-	{{convert|3|+/-|6|ft}}	3 ± 6 फीट (0.91 ± 1.83 मी)
± ±	{{convert|3|±|6|ft}}	3 ± 6 फीट (0.91 ± 1.83 मी)
+	{{convert|3|+|6|ft}}	3 + 6 फीट (0.91 + 1.83 मी)
,	{{convert|3|,|6|ft}}	3, 6 फीट (0.91, 1.83 मी)
, and	{{convert|3|, and|6|ft}}	3, आ 6 फीट (0.91, आ 1.83 मी)
, or	{{convert|3|, or|6|ft}}	3, या 6 फीट (0.91, या 1.83 मी)
by	{{convert|3|by|6|ft}}	3 बाई 6 फीट (0.91 बाई 1.83 मी)
x	{{convert|3|x|6|ft}}	3 बाई 6 फीट (0.91 मी × 1.83 मी)	Scientific notation. |abbr=on abbreviates the first unit
× ×	{{convert|3|×|6|ft}}	3 बाई 6 फीट (0.91 मी × 1.83 मी)
x|abbr=on	{{convert|3|x|6|ft|abbr=on}}	3 बाई 6 फीट (0.91 मी × 1.83 मी)
xx	|xx| is deprecated. Use |x| instead
*	|*| is deprecated. Use |x| instead
to-	|to-| is deprecated. Use |to(-)| instead
&	|&| is deprecated. Use |and| instead
abbr=mos	|abbr=mos is deprecated. Use |x| or |by| instead

Multiple dimensions: 6 मी × 12 मी (20 बाई 39 फीट)

Use by:

• {{convert|6|by|12|ft|m}} → 6 बाई 12 फीट (1.8 बाई 3.7 मी)

Use ×, multiplication sign, or x, letter:

• {{convert|6|x|12|m|ft}} → 6 बाई 12 मीटर (20 बाई 39 फीट)

In science, the formal way is to set |x| and |abbr=on (keeping dimensions right, like in area = x km²):

• {{convert|6|x|12|m|ft|abbr=on}} → 6 मी × 12 मी (20 बाई 39 फीट)

About feet, inch in ranges and multiples

While it is possible to enter feet, inch in a simple conversion, this is not possible for ranges:

• {{convert|1|ft|3|in|x|3|ft|5|in|mm}} → 1 फुट 3 इंच ()

Default behaviour, for comparison:

• {{convert|1|ft|3|in|mm}} → 1 फुट 3 इंच (380 मिमी)

Words

Spelling of unit name: UK metre or US meter?

Default spelling of units is en-UK. To show en-US spelling, use |sp=us:

{{convert|1|m|ft}} → 1 मीटर (3.3 फीट)—default

{{convert|1|m|ft|sp=us}} → 1 मीटर (3.3 फीट)

Spell out numbers: ten miles

To write a number in words, use |spell=in:

• {{convert|10|mi|m|spell=in}} → ten मील (16,000 मी)

To spell out both in and out values, use |spell=on:

• {{convert|10|mi|m|spell=on}} → ten मील (sixteen thousand मीटर)

To make first letter a capital, use |spell=In, |spell=On

• {{convert|10|mi|m|spell=In}} → Ten मील (16,000 मी)
• {{convert|10|mi|m|spell=On}} → Ten मील (sixteen thousand मीटर)

Remember that the spelling of the units (ft, m) is independently set by |abbr=. To the extreme:

• {{convert|10|mi|m|spell=on|abbr=off|sp=us}} → ten मील (sixteen thousand मीटर)

Inserted before units: 4 planted acres

• {{convert|4|acre||adj=pre|planted}} → 4 planted एकड़ (1.6 हे)

disp=preunit is similar, but has no separator after the specified text, and can have different text for the output value:

• {{convert|4|acre||disp=preunit|planted }} → 4 planted एकड़ (1.6 planted हे)
• {{convert|4|acre||disp=preunit|planted |reforested-}} → 4 planted एकड़ (1.6 reforested-हे)

After adjective unit: A 10-फुट-long corridor

{{convert|10|ft|m|adj=mid|-long}} → 10-फुट-long (3.0 मी)

Plurals: 1 inch, 2 inches

The unit symbol is singular always. Depending on the preceding number only, a unit name can be shown plural.

• {{convert|1|metre}} → 1 मीटर (3 फुट 3 इंच)
• {{convert|2|metre}} → 2 मीटर (6 फुट 7 इंच)
• {{convert|2|metre|abbr=on}} → 2 मी (6 फुट 7 इंच)

Exception

Entering the unit spelled |foot| forces singular output "foot", whatever the number is.

• {{convert|100|foot|abbr=off}} → 100 फुट (30 मीटर)

Fractions: one-eighth of an imperial pint

The convert template also supports spelling out fractions.

• {{convert|1/4|oz|g|spell=in}} → one-quarter औंस (7.1 ग्रा)

Any additional words needed for the fraction can also be added at the end of the template.

• {{convert|1/8|imppt|mL|spell=in|adj=pre|of an}} → one-eighth of an imperial pint (71 मिलि)

Numbers

Using an SI prefix: gigameter (Gm), or micrometer (μm)

Metric prefixes
Text Symbol Factor yotta Y 1024 zetta Z 1021 exa E 1018 peta P 1015 tera T 1012 giga G 109 mega M 106 kilo k 103 hecto h 102 deca da 101 (none) (none)  1 deci d 10−1 centi c 10−2 milli m 10−3 micro μ 10−6 nano n 10−9 pico p 10−12 femto f 10−15 atto a 10−18 zepto z 10−21 yocto y 10−24

Units can have an SI prefix like G before the unit: Gm, and giga before the name: gigameter. These are plain multiplication factors.

To illustrate, these are trivial calculations (from meter to meter), showing the multiplication factor:

• 12 गीगामी (1.2×10¹⁰ मी)
• 12 µमी (1.2×10⁻⁵ मी)

The prefix can be added before the SI unit (here: unit m for meter):

• {{convert|12|Gm|mi|abbr=on}} → 12 गीगामी (7,500,000 मील)
• Mm: 12 मेगामी (7,500 मील)
• km: 12 किमी (39,000 फीट)
• mm: 12 मिमी (0.47 इंच)
• μm: 12 µमी (0.012 मिमी)
• um: 12 µमी (0.012 मिमी) (letter "u" can be used for "μ" here)

The prefix can be used in the output unit:

• {{convert|12000|mi|Mm|abbr=on}} → 12,000 मील (19 मेगामी)
• {{convert|12|in|μm|abbr=on}} → 12 इंच (300,000 µमी)

As an exception, the non-SI unit "inch" can have the "μ" prefix too)

• {{convert|12|μm|μin|abbr=on}} → 12 µमी (470 µin)

आगे पढ़ीं: Help:Convert units § SI prefixes

Engineering notation: 7 × 10⁶ m

In the unit: e6m

Engineering number notations like 7E6 (for 7 × 10⁶) can be entered as a "prefix" to the unit:

• {{convert|7|e6m}} → 7 मिलियन मीटर (23,000,000 फीट)

The same is possible for the output unit:

• {{convert|23,000,000|ft|e6m}} → 23,000,000 फीट (7.0×10^⁶ मी)

Any standard unit (not a combination, multiple, or built-in unit) can have such a prefix:

• e3 (thousand),
• e6 (million),
• e9 (billion),
• e12 (trillion),
• e15 (quadrillion).

Scientific notation: 1.23×10⁻¹⁴

In scientific notation, a number is written like 1.23×10⁻¹⁴. The plain number has exactly one digit before the decimal point.

With {{convert}}, the input can be in e-notation such as 12.3e4. This value is displayed as a power of ten, and the output is displayed in scientific notation, except that an output value satisfying 0.01 <= v < 1000 is shown as a normal number. In addition, if the output value is 1000 and sigfig=4 is used, the value is displayed as a normal number.

• {{convert|12.3e-15|atm|atm|abbr=on}} → 12.3×10⁻¹⁵ atm (1.23×10⁻¹⁴ atm)
• {{convert|0.00000005|atm|atm|abbr=on}} → 0.00000005 atm (5.0×10⁻⁸ atm)

Input with fractions: 1 ¹⁄₂ इंच (38.1 मिमी)

The number to convert can be written in fractions. Both / (keyboard slash) and ⁄ (fraction slash) are accepted:

• {{convert|1/2|in|mm|1}} → ¹⁄₂ इंच (12.7 मिमी)
• {{convert|1⁄2|in|mm|1}} → ¹⁄₂ इंच (12.7 मिमी)

With integers, use a + sign

• {{convert|2+1⁄2|in|mm|1}} → 2 ¹⁄₂ इंच (63.5 मिमी)

When negative, use a hyphen - and repeat it:

• {{convert|-2-1⁄2|in|mm|1}} → −2 ¹⁄₂ इंच (−63.5 मिमी)
• {{convert|2-1⁄2|in|mm|1}} → 2–¹⁄₂ इंच (50.8–12.7 मिमी) Note: this is read as a range
• {{convert|-2+1⁄2|in|mm|1}} → N Should be a number, not an expression (do not require a calculation)

Output with horizontal fraction bar in: 1/2 inch

Using a double slash (//) returns a horizontal bar fraction:

• {{convert|1//2|in|mm|1}} → 1/2 इंच (12.7 मिमी)
• {{convert|2+1//2|in|mm|1}} → 2 1/2 इंच (63.5 मिमी)

Thousands separator: 1,000 mi or 1000 mi

In input, a comma for thousands separator is accepted but not required; a gap (space) is not accepted. In output, by default, the thousand separator is the comma:

• {{convert|1234567|m|ft}} → 1,234,567 मीटर (4,050,417 फीट)
• {{convert|1,234,567|m|ft}} → 1,234,567 मीटर (4,050,417 फीट)
• {{convert|1 234 567|m|ft}} → N

Set |comma=off to remove the separator from the output:

• {{convert|1234567|m|ft|comma=off}} → 1234567 मीटर (4050417 फीट)

Use |comma=gaps to use digit grouping by gap (thin space) as a thousands separator:

• {{convert|1234567|m|ft|comma=gaps}} → 1234567 मीटर (4050417 फीट)

Default behaviour, for comparison:

• {{convert|1234567|m|ft}} → 1,234,567 मीटर (4,050,417 फीट)

Setting |comma=5 or |comma=gaps5 will only add the separator when the number of digits is 5 or more:

• {{convert|1234|m|ft|comma=5}} → 1234 मीटर (4049 फीट)
• {{convert|1234567|m|ft|comma=5}} → 1,234,567 मीटर (4,050,417 फीट)
• {{convert|1234|m|ft|comma=gaps5}} → 1234 मीटर (4049 फीट)
• {{convert|1234567|m|ft|comma=gaps5}} → 1234567 मीटर (4050417 फीट)

Default behaviour, for comparison:

• {{convert|1234|m|ft}} → 1,234 मीटर (4,049 फीट)

Output manipulation

Brackets and separators: 10 m [33 ft]

Punctuation that distinguishes the two measurements is set by |disp=.
Options are: b (the default), sqbr, comma, or, br, x|…:

• {{convert|10|m|ft|disp=sqbr}} → 10 मीटर [33 फीट]
• {{convert|10|m|ft|disp=comma}} → 10 मीटर, 33 फीट
• {{convert|10|m|ft|disp=or}} → 10 मीटर या 33 फीट

Default behaviour, for comparison:

• {{convert|10|m|ft}} → 10 मीटर (33 फीट)

Setting |disp=br will force a new line (<br/>)

• {{convert|10|m|ft|disp=br}} → 10 मीटर
  33 फीट

Also |disp=br() will force a new line, and keep the brackets:

• {{convert|10|m|ft|disp=br()}} → 10 मीटर
  (33 फीट)

Setting |disp=x|… allows any text as separator:

• {{convert|10|m|ft|disp=x|_MyText_}} → 10 मीटर_MyText_33 फीट—(To display spaces, use  )

Flipping (reordering) the two measurements: 1,609.3 मीटर (1 मील)

Setting |order=flip will flip (swap) the two measurements:

• {{convert|1|mi|m|order=flip}} → 1,609.3 मीटर (1 मील)

Default behaviour, for comparison:

• {{convert|1|mi|m}} → 1 मील (1,609.3 मीटर)

When converting to multiple units, the effect is:

• {{convert|10|km|mi nmi|order=flip}} → 6.2137 मील; 5.3996 समुंद्री मील (10 किलोमीटर)
• {{convert|10|km|nmi mi|order=flip}} → 5.3996 समुंद्री मील; 6.2137 मील (10 किलोमीटर)

Displaying parts of the result: 2 (1.5)

It is possible to display only parts of the conversion result:

Convert	Output	Description
{{convert|2|cuyd|m3}}	2 घन गज (1.5 मी3)	Default behaviour, for comparison
{{convert|2|cuyd|m3|abbr=values}}	2 (1.5)	Input and output numbers
{{convert|2|cuyd|m3|disp=unit}}	घन गज	Input unit
{{convert|2|cuyd|m3|disp=unit|adj=on}}	घन-गज	Input unit, adjective (hyphenated)
{{convert|2|cuyd|cuyd|0|disp=out|abbr=off}}	2 घन गज	Input (workaround)
{{convert|2|cuyd|m3|abbr=~}}	2 घन गज [घन गज] (1.5 मी3)	Input: both name and symbol
{{convert|2|cuyd|m3|disp=unit2}}	मी3	Output unit (symbol)
{{convert|2|cuyd|m3|disp=unit2|abbr=off}}	घन मीटर	Output unit (name)
{{convert|2|cuyd|m3|disp=number}}	1.5	Output value
{{convert|2|cuyd|m3|disp=out}}	1.5 मी3	Output value and unit
{{convert|2|cuyd|m3|disp=out|abbr=off}}	1.5 घन मीटर	Output value and unit

Display both input name and symbol: 2 kilopascals [kPa]

Setting |abbr=~ returns both name and symbol of the first (input) unit:

• {{convert|2|kPa|psi|abbr=~}} → 2 किलोपास्कल [किपास्कल] (0.29 psi)
• A {{convert|2|kPa|psi|abbr=~|adj=on}} pressure → A 2-किलोपास्कल [किपास्कल] (0.29 psi) pressure

Table options

For the wikitable structure, there are three options: add a line-break, split the result over columns and make the table sortable.

Enforced line break

|disp=br adds a line-break and omits brackets.

|disp=br() adds a line-break and does add brackets to the converted value. This may be useful in tables:

|disp=br	|disp=br()
100 किलोमीटर 62 मील	100 किलोमीटर (62 मील)

Table columns showing numbers only

Using {convert} in a table cell, with |disp=table splits the result over two columns:

{{convert|10|m|ft|disp=table}} →

style="text-align:right;"|10

|style="text-align:right;"|33

|disp=tablecen does the same, and also centers the text:

{{convert|20|m|ft|disp=tablecen}} →

style="text-align:center;"|20

|style="text-align:center;"|66

The units are added as a column header:

	m	ft
|disp=table	10	33
|disp=tablecen	20	66
|disp=<other> (default)	30 मीटर (98 फीट)

Sorting

Use |sortable=on to include a hidden numerical sortkey in the output, suitable for use in a table with sortable columns. Technically, this places a hidden string before the actual displayed values:

{{convert|10|m|ft|sortable=on}} → <span style="display:none">7001100000000000000</span>10 metres (33&nbsp;ft)

Use both |disp=table and |sortable=on together to produce table columns (pipe symbols) for each value in sortable columns:

	m	ft
A	15 3⁄4	52
B	15.5	51
C	16.0	52.5
D	16	52

The generated sortkey is calculated in a consistent way based on both the value and its unit as passed to the convert template. In most cases convert uses the passed value converted to SI base units. It is therefore not necessarily the displayed value or other alternate units and is calculated regardless of output format options. Using different units or different order of units in individual rows should therefore not lead to incorrect sorting, although variations in rounding can give surprising results, since an unrounded number is used for the sortkey.

Units

All units

See also: Convert/list of units

Units are case-sensitive: use kW, not KW or kw

The table below lists units supported by template {{convert}}. The list is not complete—more complete lists are linked for each dimension. A complete list is at the full list of units.

Explanation - unit codes

The {{convert}} template uses unit-codes, which are similar to (but not necessarily exactly the same as) the usual written abbreviation for a given unit. These 'unit-codes' are given in column 3 of the following tables, and are accepted as input by the {{convert}} template as the second and third unnamed parameters. For example, {{convert|100|kg|lb}} produces "100 किलोग्राम (220 पाउंड)" and {{convert|100|lb|kg}} produces "100 पाउंड (45 किग्रा)"

Some units have alternative unit-codes; these are shown in brackets in column 3, e.g. °F (F): either may be entered for Fahrenheit (but not lower-case f).

The unit-codes should be treated as case-sensitive, especially in cases like {{convert|100|Mm|mm}}, which produces "100 मेगामीटर (1.0×10¹¹ मिमी)".

The output of {{convert}} can display multiple converted units, if further unit-codes are specified after the second unnamed parameter (without the | separator). Typical combination output units are listed below in column 7. For example, {{convert|55|nmi|km mi}} produces "55 समुंद्री मील (102 किमी; 63 मील)", and {{convert|1|oz|ozt g gr}} produces "1 औंस (0.91 ozt; 28 ग्रा; 440 ग्रे)".

Abridged list of units supported by {{Convert}}
ब्याख्या
सिस्टम	इकाई	इकाई- कोड		चीन्हा भा छोटरूप.	नोट	डिफॉल्ट बदलाव नमूना	कंबीनेशन आउटपुट इकाई
the system(s) to which the unit belongs	units listed by name	unit-code to use in template		symbols shown in output	other notes about the units	sample of the default conversion for the unit	output codes for multiple conversions
AREA (Full list)
system	unit	unit- code		abbrev- iation	notes	sample default conversion	combination output units
SI	वर्ग किलोमीटर	km2		किमी2	US spelling: square kilometer	1.0 किमी2 (11,000,000 वर्ग फु)	km2 sqmi
	वर्ग मीटर	m2		मी2	US spelling: square meter	1.0 मी2 (11 वर्ग फु)	m2 sqft
	वर्ग सेंटीमीटर	cm2		सेमी2	US spelling: square centimeter	1.0 सेमी2 (0.0011 वर्ग फु)	cm2 sqin
	वर्ग मिलीमीटर	mm2		मिमी2	US spelling: square millimeter	1.0 मिमी2 (1.1×10−5 वर्ग फु)	mm2 sqin
non-SI metric	हेक्टेयर	ha		हे		1.0 हे (2.5 एकड़)
Imperial & US customary	वर्ग मील	sqmi		वर्ग मील		1.0 वर्ग मील (2.6 किमी2)	sqmi km2
	एकड़	acre		(none)		1.0 एकड़ (0.40 हे)
	वर्ग गज	sqyd		वर्ग गज		1.0 वर्ग गज (0.84 मी2)
	वर्ग फुट	sqft (sqfoot)		वर्ग फु	long code "sqfoot" outputs square foot (and never feet)	1.0 वर्ग फु (0.093 मी2)	sqft m2 (sqfoot m2)
	वर्ग इंच	sqin		वर्ग इंच		1.0 वर्ग इंच (6.5 सेमी2)	sqin cm2
Other	वर्ग समुंद्री मील	sqnmi		वर्ग समु.मी		1.0 वर्ग समु.मी (3.4 किमी2; 1.3 वर्ग मील)
	dunam	dunam		(none)	For alternative spellings and definitions see the full list	1.0 dunam (0.0010 किमी2; 0.00039 वर्ग मील)
	tsubo	tsubo		(none)		1.0 tsubo (3.3 मी2)
DENSITY (Full list)
system	unit	unit- code		abbrev- iation	notes	sample default conversion	combination output units
Metric	किलोग्राम प्रति घनमीटर	kg/m3		किग्रा/मी3		1.0 किग्रा/मी3 (1.7 lb/cu yd)	kg/m3 lb/ft3 (kg/m3 lb/cuft) kg/m3 lb/yd3 (kg/m3 lb/cuyd)
	ग्राम per घन मीटर	g/m3		ग्रा/मी3		1.0 ग्रा/मी3 (0.0017 lb/cu yd)	g/m3 kg/m3 g/m3 lb/ft3 (g/cm3 lb/cuft) g/m3 lb/yd3 (g/cm3 lb/cuyd)
Imperial & US customary	पाउंड प्रति घनफुट	lb/ft3		lb/cu ft		1.0 lb/cu ft (0.016 ग्रा/सेमी3)	lb/ft3 kg/m3 (lb/cu ft g/m3) lb/ft3 g/m3 (lb/cu ft g/m3)
	पाउंड प्रति घन गज	lb/yd3		lb/cu yd		1.0 lb/cu yd (0.59 किग्रा/मी3)	lb/yd3 kg/m3 (lb/cuyd kg/m3) lb/yd3 g/m3 (lb/cuyd g/m3)
ENERGY (Full list)
system	unit	unit- code		abbrev- iation	notes	sample default conversion	combination output units
SI	गीगाजूल	GJ		(none)		1.0 गीगाजूल (240,000,000 cal)
	मेगाजूल	MJ		(none)		1.0 मेगाजूल (240,000 cal)
	किलोजूल	kJ		(none)		1.0 किलोजूल (240 cal)
	हेक्टोजूल	hJ		(none)		1.0 हेक्टोजूल (24 cal)
	डेकाजूल	daJ		(none)		1.0 डेकाजूल (2.4 cal)
	जूल	J		(none)		1.0 जूल (0.24 cal)
	डेसीजूल	dJ		(none)		1.0 डेसीजूल (0.024 cal)
	सेंटीजूल	cJ		(none)		1.0 सेंटीजूल (0.0024 cal)
	मिलीजूल	mJ		(none)		1.0 मिलीजूल (0.00024 cal)
	माइक्रोजूल	µJ (uJ)		(none)		1.0 माइक्रोजूल (2.4×10−7 cal)
	नैनोजूल	nJ		(none)		1.0 नैनोजूल (2.4×10−10 cal)
cgs	megaerg	Merg		Merg		1.0 Merg (0.10 जूल)
	kiloerg	kerg		kerg		1.0 kerg (0.10 मिलीजूल)
	erg	erg		(none)		1.0 erg (0.10 माइक्रोजूल)
Watt-hour multiples	terawatt-hour	TWh		TWh		1.0 TWh (3.6 पेटाजूल)
		TW.h		TW·h
	गीगावाट-घंटा	GWh		GWh		1.0 GWh (3.6 टेराजूल)
		GW.h		GW·h
	megawatt-hour	MWh		MWh		1.0 MWh (3.6 गीगाजूल)
		MW.h		MW·h
	kilowatt-hour	kWh		kWh		1.0 kWh (3.6 मेगाजूल)
		kW.h		kW·h
	watt-hour	Wh		Wh		1.0 Wh (3.6 किलोजूल)
		W.h		W·h
Electron- volt multiples
	gigaelectronvolt	GeV		GeV		1.0 GeV (0.16 नैनोजूल)
	megaelectronvolt	MeV		MeV		1.0 MeV (0.16 पिकोजूल)
	kiloelectronvolt	keV		keV		1.0 keV (0.16 फेम्टोजूल)
	electronvolt	eV		eV		1.0 eV (0.16 एट्टोजूल)
	millielectronvolt	meV		meV		1.0 meV (0.16 जेप्टोजूल)
Calorie multiples	कैलोरी	Cal		Cal	The thermo-chemical calorie is the default definition. For others, see the full list.	1.0 Cal (4.2 किलोजूल)
	megacalorie	Mcal		Mcal		1.0 Mcal (4.2 मेगाजूल)
	किलोकैलोरी	kcal		(none)		1.0 किलोकैलोरी (4.2 किलोजूल)
	कैलोरी	cal		cal		1.0 cal (4.2 जूल)
	millicalorie	mcal		mcal		1.0 mcal (4.2 मिलीजूल)
pound/ ounce-foot/ inch-hour-minute-second	foot-poundal	ftpdl		ft·pdl		1.0 ft·pdl (0.042 जूल)
	फुट-पाउंड बल	ftlbf		फुट·पाउंडबल		1.0 फुट·पाउंडबल (1.4 जूल)
		ftlb-f		फुट·पाउंडबल
	इंच-पाउंड बल	inlbf		इंच·पाउंडबल		1.0 इंच·पाउंडबल (110 मिलीजूल)
		inlb-f		इंच·पाउंडबल
	इंच-औंस बल	inozf		इंच·औंसबल		1.0 इंच·औंसबल (7.1 मिलीजूल)
		inoz-f		इंच·औंसबल
	हार्सपावर-घंटा	hph		hp·h		1.0 hp·h (0.75 kWh)
British thermal unit	ब्रिटिश ऊष्मा इकाई	Btu		Btu	The International Steam Table British thermal unit is used. For others, see the full list.	1.0 Btu (1.1 किलोजूल)
		BTU		BTU
TNT-based units	gigatonne of TNT	GtTNT		(none)		1.0 gigatonne of TNT (4.2 एक्साजूल)
	gigaton of TNT	GtonTNT		(none)
	megatonne of TNT	MtTNT		(none)		1.0 megatonne of TNT (4.2 पेटाजूल)
	megaton of TNT	MtonTNT		Mt
	kilotonne of TNT	ktTNT		(none)		1.0 kilotonne of TNT (4.2 टेराजूल)
	kiloton of TNT	ktonTNT		kt
	tonne of TNT	tTNT		(none)		1.0 tonne of TNT (4.2 गीगाजूल)
	ton of TNT	tonTNT		(none)
Other
	Hartree	Eh		Eh		1.0 Eh (27 eV)
	rydberg	Ry		Ry		1.0 Ry (14 eV)
	tonne of oil equivalent	toe		toe		1.0 toe (42 गीगाजूल)
	barrel of oil equivalent	BOE		BOE		1.0 BOE (6.1 गीगाजूल)
	cubic foot of natural gas	cuftnaturalgas (cufootnaturalgas)			Unit-code cufootnaturalgas will show "cubic foot of natural gas" if plural.	1.0 cubic foot of natural gas (1.1 मेगाजूल)
	litre-atmosphere	latm		l·atm		1.0 l·atm (100 जूल)
		Latm		L·atm
	इंपीरियल गैलन एटमॉस्फीयर	impgalatm		imp gal·atm		1.0 imp gal·atm (460 जूल)
	US gallon-atmosphere	USgalatm (usgalatm)		US gal·atm		1.0 US gal·atm (380 जूल)
		U.S.galatm (usgalatm)		U.S. gal·atm
FORCE (Full list)
system	unit	unit- code		abbrev- iation	notes	sample default conversion	combination output units
SI	गीगान्यूटन	GN		(none)	Allows triple output units. See: full list.	1.0 गीगान्यूटन (220,000,000 lbf)	GN LT-f GN LTf GN ST-f GN STf
	मेगान्यूटन	MN		(none)	Allows triple output units. See: full list.	1.0 मेगान्यूटन (220,000 lbf)	MN LT-f MN LTf MN ST-f MN STf
	किलोन्यूटन	kN		(none)	Allows triple output units. See: full list.	1.0 किलोन्यूटन (220 lbf)	kN LT-f kN LTf kN ST-f kN STf
	न्यूटन	N		(none)		1.0 न्यूटन (0.22 lbf)	N lb-f N lbf N oz-f N ozf
	मिलीन्यूटन	mN		(none)		1.0 मिलीन्यूटन (0.00022 lbf)	mN oz-f mN ozf mN gr-f mN grf
	माइक्रोन्यूटन	µN (uN)		(none)		1.0 माइक्रोन्यूटन (2.2×10−7 lbf)	µN gr-f µN grf
	नैनोन्यूटन	nN		(none)		1.0 नैनोन्यूटन (2.2×10−10 lbf)	nN gr-f nN grf
cgs	megadyne	Mdyn		Mdyn		1.0 Mdyn (2.2 lbf)
	किलोडाइन	kdyn		kdyn		1.0 kdyn (0.036 ozf)
	डाइन	dyn (dyne)		(none)		1.0 डाइन (0.016 ग्रेनबल)
	millidyne	mdyn		mdyn		1.0 mdyn (1.6×10−5 ग्रेनबल)
Metric gravitational units	tonne-force	t-f		tf		1.0 tf (9.8 किलोन्यूटन; 0.98 LTf; 1.1 STf)
		tf		tf
	kilogram-force	kg-f		kgf		1.0 kgf (9.8 न्यूटन; 2.2 lbf)
		kgf		kgf
	ग्राम-बल	g-f		ग्राबल		1.0 ग्राबल (9.8 मिलीन्यूटन; 0.035 ozf)
		gf		ग्रामबल
	milligram-force	mg-f		mgf		1.0 mgf (9.8 माइक्रोन्यूटन; 0.015 ग्रेनबल)
		mgf		mgf
Avoirdupois-based units	poundal	pdl		pdl		1.0 pdl (0.14 न्यूटन)
	लांग टन-बल	LT-f		LTf		1.0 LTf (10.0 किलोन्यूटन)	LT-f ST-f
		LTf		लांग टन-बल			LTf STf
	short ton-force	ST-f		STf		1.0 STf (8.9 किलोन्यूटन)	ST-f LT-f
		STf		short ton-force			STf LTf
	पाउंड-बल	lb-f		lbf		1.0 lbf (4.4 न्यूटन)
		lbf		lbf
	ग्रेन-बल	gr-f		ग्रेनबल		1.0 ग्रेनबल (640 माइक्रोन्यूटन)
		grf		ग्रेन-बल
LENGTH (Full list)
system	unit	unit- code		abbrev- iation	notes	sample default conversion	combination output units
SI	मेगामीटर	Mm		मेगामी	US spelling: megameter	1.0 मेगामी (3,280,839 फुट 11 इंच)
	किलोमीटर	km		किमी	US spelling: kilometer	1.0 किमी (0.62 मील)	km mi
	मीटर	m		मी	US spelling: meter	1.0 मी (3 फुट 3 इंच)	m ft m ftin
	सेंटीमीटर	cm		सेमी	US spelling: centimeter	1.0 सेमी (0.39 इंच)	cm in
	मिलीमीटर	mm		मिमी	US spelling: millimeter	1.0 मिमी (0.039 इंच)	mm in
	माइक्रोमीटर	µm (um)		µमी	US spelling: micrometer	1.0 µमी (3.9×10−5 इंच)
	नैनोमीटर	nm		nमी	US spelling: nanometer	1.0 nमी (3.9×10−8 इंच)
non-SI metric	एंगस्ट्रम	Å (angstrom)		Å		1.0 Å (3.9×10−9 इंच)
Imperial & US customary	मील	mi		(none)		1.0 मील (1.6 किमी)	mi km
	फर्लांग	furlong		(none)		1.0 फर्लांग (660 फीट; 200 मी)
	जरीब	chain		(none)		1.0 जरीब (66 फीट; 20 मी)
	लट्ठा	rd		rd	For other names of this unit see the full list.	1.0 rd (17 फीट; 5.0 मी)
	फैदम	fathom		(none)	fathom ≡ 6 ft	1.0 फैदम (6.0 फीट; 1.8 मी)
	गज	yd		(none)	assumes the international definition	1.0 गज (0.91 मी)
	फुट	ft (foot)		(none)	long code "foot" outputs foot (and never feet)	1.0 फुट (0.30 मी)	ftin (feet and inches) ft m (foot m)
	इंच	in		(none)		1.0 इंच (25 मिमी)	in cm in mm
Other	समुंद्री मील	nmi		समु-मील	the international standard nautical mile For other nautical miles see the full list.	1.0 समु-मील (1.9 किमी; 1.2 मील)
	पारसेक	pc		pc		1.0 pc (3.3 प्रकाशवर्ष)
	प्रकाश-बरिस	ly		प्रकाशवर्ष		1.0 प्रकाशवर्ष (63,000 AU)
	खगोलीय इकाई	AU		AU		1.0 AU (150,000,000 किमी; 93,000,000 मील)
MASS (Full list)
system	unit	unit- code		abbrev- iation	notes	sample default conversion	combination output units
SI	किलोग्राम	kg		किग्रा	Allows triple output units. See: full list.	1.0 किग्रा (35 औंस)	kg lb kg st
	ग्राम	g		ग्रा		1.0 ग्रा (0.035 औंस)	g oz
	मिलीग्राम	mg		मिग्रा		1.0 मिग्रा (3.5×10−5 औंस)	mg gr
	माइक्रोग्राम	µg (ug)		µग्रा		1.0 µग्रा (3.5×10−8 औंस)
non-SI metric	टन	t		(none)	Allows triple output units. See: full list.	1.0 टन (0.98 लांग टन; 1.1 शार्ट टन)	t LT t ST
	मीटरी टन	MT		t			MT LT MT ST
Avoirdupois	लांग टन	LT		(none)	2,240 lb used mostly in the British Commonwealth. Allows triple output units. See: full list.	1.0 लांग टन (1.0 टन)	LT t LT MT LT ST
		long ton		लांग टन
	शार्ट टन	ST		(none)	2,000 lb used mostly in the US. Allows triple output units. See: full list.	1.0 शार्ट टन (0.91 टन)	ST t ST MT ST LT
		short ton		शार्ट टन
	स्टोन	st		(none)	14 lb used mostly in the British Commonwealth except Canada. Allows triple output units. See: full list.	1.0 स्टोन (14 पाउंड; 6.4 किग्रा)	st kg st lb
	पाउंड	lb		(none)	Allows triple output units. See: full list.	1.0 पाउंड (0.45 किग्रा)	lb kg lb st
	औंस	oz		(none)		1.0 औंस (28 ग्रा)	oz g
	ड्राम	drachm		(none)		1.0 ड्राम (1.8 ग्रा)
	ड्राम	dram		(none)
	ग्रेन	gr		ग्रे	equivalent to the troy grain	1.0 ग्रे (0.065 ग्रा)
Troy	troy ounce	ozt		ozt		1.0 ozt (1.1 औंस; 31 ग्रा)
other	कैरट	carat		(none)		1.0 कैरट (0.20 ग्रा)
SPEED (Full list)
system	unit	unit- code		abbrev- iation	notes	sample default conversion	combination output units
SI	मीटर प्रति सेकेंड	m/s		मी/से	US spelling: meter per second	1.0 मी/से (3.3 फुट/से)	m/s ft/s (m/s foot/s)
non-SI metric	किलोमीटर प्रति घंटा	km/h		किमी/घं	US spelling: kilometer per hour	1.0 किमी/घं (0.62 मील/घं)	km/h mph
Imperial & US customary	मील प्रति घंटा	mph		मील/घं		1.0 मील/घं (1.6 किमी/घं)	mph km/h mph kn
	फुट प्रति सेकेंड	ft/s (foot/s)		फुट/से	long code "foot/s" outputs foot per second (and never feet)	1.0 फुट/से (0.30 मी/से)	ft/s m/s
Maritime units	नॉट	kn (knot)		kn		1.0 kn (1.9 किमी/घं; 1.2 मील/घं)	kn mph
TEMPERATURE (Full list)
system	unit	unit- code		abbrev- iation	notes	sample default conversion	combination output units
SI	K	K		K	Allows triple output units. See: full list.	1.0 K (−272.15 °C; −457.87 °F)	K °C (K C) K °R (K R) K °F (K F)
	°C	°C (C)		°C		1.0 °C (33.8 °F)	°C K (C K) °C °R (C R) °C °F (C F)
Imperial & US customary	°R	°R (R)		°R		1.0 °R (0.556 K; −458.670 °F; −272.594 °C)	°R K (R K) °R °C (R C) °R °F (R F)
	°F	°F (F)		°F		1.0 °F (−17.2 °C)	°F K (F K) °F °C (F C) °F °R (F R)
	Celsius change	C-change			Used for temperature intervals instead of actual temperatures Example:  {{convert|5|C-change|0}} warmer Result: 5 °C (9 °F) warmer
	Fahrenheit change	F-change			Used for temperature intervals instead of actual temperatures Example:  {{convert|10|F-change|0}} colder Result: 10 °F (6 °C) colder
TORQUE (Full list)
system	unit	unit- code		abbrev- iation	notes	sample default conversion	combination output units
Industrial
SI	न्यूटन मीटर	Nm		(none)	Triple combinations are also possible. See the full list.	1.0 न्यूटन मीटर (0.74 lbf·ft)	Nm kg.m Nm lb.ft
Non-SI metric	किलोग्राम मीटर	kg.m		किग्रा·मी		1.0 किग्रा·मी (9.8 न्यूटन मीटर; 7.2 पौंड·फुट)	kg.m Nm kg.m lb.ft
Imperial & US customary	पौंड बल-फुट	lb.ft		पौंड·फुट		1.0 पौंड·फुट (1.4 न्यूटन मीटर)	lb.ft Nm lb.ft kg-m
Scientific
SI	न्यूटन मीटर	N.m		(none)	Triple combinations are also possible. See the full list.	1.0 न्यूटन मीटर (0.74 lbf·ft)	N.m kgf.m N.m lbf.ft
Non-SI metric	किलोग्राम बल-मीटर	kgf.m		kgf·m		1.0 kgf·m (9.8 न्यूटन मीटर; 7.2 lbf·ft)	kgf.m N.m kgf.m lbf.ft
Imperial & US customary	pound force-foot	lbf.ft		lbf·ft		1.0 lbf·ft (1.4 न्यूटन मीटर)	lbf.ft N.m lbf.ft kgf.m
VOLUME (Full list)
system	unit	unit- code		abbrev- iation	notes	sample default conversion	combination output units
SI	घन मीटर	m3		मी3	US spelling: cubic meter one kilolitre	1.0 मी3 (35 घन फुट)
	सेंटीघन मीटर	cm3		सेमी3	US spelling: cubic centimeter one millilitre	1.0 सेमी3 (3.5×10−5 घन फुट)
		cc		सीसी
	मिलीघन मीटर	mm3		मिमी3	US spelling: cubic millimeter	1.0 मिमी3 (3.5×10−8 घन फुट)
non-SI metric	किलोलिटर	kl		किलि	US spelling: kiloliter one cubic metre	1.0 किलि (220 इंपीरियल गैलन; 260 यूएस गैलन)
		kL		किलि
	लिटर	l		लि	US spelling: liter one cubic decimetre Allows triple output units. See: full list.	1.0 लि (0.22 इंपीरियल गैलन; 0.26 यूएस गैलन)	l impgal l USgal l U.S.gal l USdrygal l U.S.drygal
		L		लि			L impgal L impqt L USgal L U.S.gal L USdrygal L U.S.drygal
	सेंटीलिटर	cl		सेलि	US spelling: centiliter	1.0 सेलि (0.0022 इंपीरियल गैलन; 0.0026 यूएस गैलन)
		cL		सेलि
	मिलीलिटर	ml		मिलि	US spelling: milliliter one cubic centimetre	1.0 मिलि (0.00022 इंपीरियल गैलन; 0.00026 यूएस गैलन)	ml impoz ml USoz ml U.S.oz
		mL		मिलि			mL impoz mL USoz mL U.S.oz
Imperial & US customary	घन गज	cuyd		घन गज		1.0 घन गज (0.76 मी3)
	घनफुट	cuft (cufoot)		घन फुट	long code "cufoot" outputs cubic foot (and never feet)	1.0 घन फुट (0.028 मी3)
	घन इंच	cuin		घन इंच		1.0 घन इंच (16 सेमी3)
Imperial	इंपीरियल बैरल	impbbl		इंपीरियल बैरल	36 imp gal	1.0 इंपीरियल बैरल (160 लि; 36 इंपीरियल गैलन; 43 यूएस गैलन)
	इंपीरियल बुशेल	impbsh		इंपीरियल बुशेल	8 imp gal	1.0 इंपीरियल बुशेल (36 लि; 8.0 इंपीरियल गैलन; 8.3 US dry gal)
		impbu		इंपीरियल बुशेल
	इंपीरियल गैलन	impgal		इंपीरियल गैलन	4.54609 litres by definition, also 4 imp qt or 8 imp pt or 160 imp fl oz Allows triple output units. See: full list.	1.0 इंपीरियल गैलन (4.5 लि; 1.2 यूएस गैलन)	impgal l impgal L impgal USgal impgal U.S.gal impgal USdrygal impgal U.S.drygal
	imperial quart	impqt		imp qt	1/4 imp gal or 40 imp fl oz	1.0 imp qt (1,100 मिलि; 38 यूएस फ्लूइड औंस)
	imperial pint	imppt		imp pt	1/8 imp gal or 20 imp fl oz	1.0 imp pt (0.57 लि)
	इंपीरियल फ्लूइड औंस	impoz (impfloz)		इंपीरियल फ्लूइड औंस	1/160 imp gal	1.0 इंपीरियल फ्लूइड औंस (28 मिलि; 0.96 यूएस फ्लूइड औंस)	impoz USoz impoz U.S.oz impoz ml impoz mL
US customary liquid measure	यूएस बैरल	USbbl		यूएस बैरल	31½ US gal used for liquids except for oil and beer (see the full list)	1.0 यूएस बैरल (120 लि; 32 यूएस गैलन; 26 इंपीरियल गैलन)
		U.S.bbl		U.S. bbl
	बैरल	oilbbl		bbl	42 US gal	1.0 bbl (0.16 मी3)
	यूएस बियर बैरल	USbeerbbl (usbeerbbl)		यूएस बियरबैरल		1.0 यूएस बियरबैरल (120 लि; 31 यूएस गैलन; 26 इंपीरियल गैलन)
		U.S.beerbbl (usbeerbbl)		U.S. bbl
	यूएस गैलन	USgal		यूएस गैलन	231 cubic inches by definition, also 4 US qt or 8 US pt or 128 US fl oz Allows triple output units. See: full list.	1.0 यूएस गैलन (3.8 लि; 0.83 इंपीरियल गैलन)	USgal l USgal L USgal impgal
		U.S.gal		यू.एस. गैलन			USgal l USgal L USgal impgal
	US quart	USqt		US qt	1/4 US gal or 32 US fl oz	1.0 US qt (950 मिलि)
		U.S.qt		U.S. qt
	US pint	USpt		US pt	1/8 US gal or 16 US fl oz	1.0 US pt (0.47 लि; 0.83 imp pt)
		U.S.pt		U.S. pt
	यूएस फ्लूइड औंस	USoz (USfloz)		यूएस फ्लूइड औंस	1/128 US gal	1.0 यूएस फ्लूइड औंस (30 मिलि)	USoz ml USoz mL USoz impoz
		U.S.oz (U.S.floz)		यू.एस. फ्लूइड औंस			U.S.oz ml U.S.oz mL U.S.oz impoz
US customary dry measure	US dry barrel	USdrybbl		US dry bbl	105/32 US bsh	1.0 US dry bbl (0.12 मी3)
		U.S.drybbl		U.S. dry bbl
	यूएस बुशेल	USbsh		यूएस बुशेल	2150.42 cubic inches by definition	1.0 यूएस बुशेल (35 लि; 8.0 US dry gal; 7.8 इंपीरियल गैलन)
		U.S.bsh		U.S. bsh
	यूएस बुशेल	USbu		यूएस बुशेल	2150.42 cubic inches by definition	1.0 यूएस बुशेल (35 लि; 8.0 US dry gal; 7.8 इंपीरियल गैलन)
		U.S.bu		U.S. bu
	US dry gallon	USdrygal		US dry gal	1/8 US bsh Allows triple output units. See: full list.	1.0 US dry gal (4.4 लि)	USdrygal l USdrygal L USdrygal impgal
		U.S.drygal		U.S. dry gal			U.S.drygal l U.S.drygal L U.S.drygal impgal
	US dry quart	USdryqt		US dry qt	1/32 US bsh	1.0 US dry qt (1,100 मिलि)
		U.S.dryqt		U.S. dry qt
	US dry pint	USdrypt		US dry pt	1/32 US bsh	1.0 US dry pt (550 मिलि)
		U.S.drypt		U.S. dry pt
PRESSURE
	unit	unit- code		abbrev- iation		sample default conversion
	गीगापास्कल	GPa		(none)		1.0 गीगापास्कल (150,000 psi)
	मेगापास्कल	MPa		(none)		1.0 मेगापास्कल (150 psi)
	किलोपास्कल	kPa		(none)		1.0 किलोपास्कल (0.15 psi)
	हेक्टोपास्कल	hPa		(none)		1.0 हेक्टोपास्कल (0.015 psi)
	पास्कल	Pa		(none)		1.0 पास्कल (0.00015 psi)
	मिलीपास्कल	mPa		(none)		1.0 मिलीपास्कल (1.5×10−7 psi)
	मिलिबार	mbar		मिबार		1.0 मिबार (1.0 हेक्टोपास्कल)
		mb		मिबा
	डेसीबार	dbar		डेबार		1.0 डेबार (10 किलोपास्कल)
	बार	bar		(none)		1.0 बार (100 किलोपास्कल)
	kilobarye	kBa		kBa		1.0 kBa (1.0 हेक्टोपास्कल)
	barye	Ba		Ba		1.0 Ba (0.10 पास्कल)
	स्टैंडर्ड एटमॉस्फीयर	atm		atm		1.0 atm (100 किलोपास्कल)
	टोर	Torr		(none)		1.0 टोर (0.13 किलोपास्कल)
	मिलिमीटर पारा	mmHg		mmHg		1.0 mmHg (0.13 किलोपास्कल)
	इंच पारा	inHg		inHg		1.0 inHg (3.4 किलोपास्कल)
	पाउंड प्रति वर्ग इंच	psi		psi		1.0 psi (6.9 किलोपास्कल)
FUEL EFFICIENCY
	unit	unit- code		notes		combinations
	kilometres per litre	km/l (km/L)		Use km/L to get "km/L"		km/l mpgimp km/l mpgus
	litres per 100 kilometres	l/100 km (L/100 km)		Use L/100 km to get "L/100 km"		l/100 km mpgimp l/100 km mpgus
	litres per kilometre	l/km (L/km)		Use L/km to get "L/km"		l/km impgal/mi l/km usgal/mi
	miles per imperial gallon	mpgimp				mpgimp mpgus
	miles per US gallon	mpgus (mpgUS, mpgU.S.)		Use mpgUS to get "US" Use mpgU.S. to get "U.S." mpgus will give "U.S." if spelling is set to US & "US" otherwise		mpgus mpgimp
	imperial gallons per mile	impgal/mi				impgal/mi
	US gallons per mile	usgal/mi (USgal/mi, U.S.gal/mi)		As above with the us vs US vs U.S.		usgal/mi
The mpgUS, mpgU.S., USgal/mi vs U.S.gal/mi, km/L, L/100 km and L/km variants work within combinations also (making 36 combinations in total).
POWER
Watts, kilowatts, milliwatts, etc. are supported. As is horsepower (English & metric). Use standard abbreviations as input code (lowercase hp for horsepower, for example)
POPULATION DENSITY
	unit	unit- code		notes		combinations
	inhabitants per square kilometre	PD/sqkm		PD stands for population density, i.e. humans (inhabitants)		PD/sqkm PD/sqmi
	per square kilometre	/sqkm		Used when the word 'inhabitants' would be inappropriate.		/sqkm /sqmi
	inhabitants per hectare	PD/ha				PD/ha PD/acre
	per hectare	/ha				/ha /acre
	inhabitants per square mile	PD/sqmi		PD stands for population density, i.e. humans (inhabitants)		PD/sqmi PD/sqkm
	per square mile	/sqmi		Used when the word 'inhabitants' would be inappropriate.		/sqmi /sqkm
	inhabitants per acre	PD/acre				PD/acre PD/ha
	per acre	/acre				/acre /ha
COST PER UNIT MASS
	unit	unit- code		notes		combinations
	dollars per pound	$/lb		"$" can mean US$, HK$, etc.		(none)
	dollars per kilogram	$/kg				(none)
	dollars per troy ounce	$/ozt		12 troy ounces in 1 troy pound		(none)

'per' units: kg/hl

When using a slash (/), a unit like kg/hl is recognized as kilograms per hectolitre and will be converted with other mass/volume units.

• {{convert|1000|kg/hl}} → 1,000 किलोग्राम per हेक्टोलिटर (1,600 औंस/इंपीरियल गैलन)

Units of difference: 10 °C higher; how much in °F

When a number is the measurement for a difference, one conversion is done. This may occur in temperatures (°C, °F, K). Compare this to a range, when two conversions are done.

The only available units of difference are: |C-change=, |F-change= and |K-change=.

• {{convert|10|C}} → 10 °C (50 °F), regular temperature
• {{convert|10|C-change}} → 10 °C (18 °F), difference (e.g., "The temperature changed from 30 into 40 °C")
• {{convert|10-15|C}} → 10–15 °C (50–59 °F), range (e.g., "The temperature is between 10 and 15 °C")

Consistently, into multiple units:

• A rise of {{convert|10|C-change|F-change K-change}} → A rise of 10 °C (18 °F; 10 K)

Multiple units: 1 ft 5 in

In input

Base document § Input multiples lists options for multiple unit input (like ft,in). It can catch predefined sets only (units that can be subdivided; e.g., yd into ft):

• {{convert|1|yd|2|ft|3|in}} → 1 गज 2 फीट 3 इंच (1.60 मी)
• {{convert|2|ft|3|in|cm}} → 2 फीट 3 इंच (69 सेमी)
• {{convert|1|lb|5|oz|g}} → 1 पाउंड 5 औंस (600 ग्रा)

In output

Available multiple-unit output options predefined, like ftin and ydftin. The full list is at § Output multiples.

• {{convert|2|m|ftin}} → 2 मीटर (6 फुट 7 इंच)
• {{convert|2|m|ft in}} → 2 मीटर (6.6 फीट; 79 इंच), using a space, returns the decimal point

Default behaviour, for comparison:

• {{convert|2|m}} → 2 मीटर (6 फुट 7 इंच)

See also:

• {{hands}} a length used to measure horses
• {{Long ton}} a weight in ton, cwt, qr and lb

Currency per unit: $/mi → $/km

Using currency symbols in a $ per unit value, you can convert the per-unit:

• {{convert|10|$/mi|$/km}} → $10 per मील ($6.2/किमी)

You can set the currency in both values using |$=€:

• {{convert|10|$/mi|$/km|$=€}} → €10 per मील (€6.2/किमी)

It is not possible to convert the currency. So, this result (mixed currencies) is not possible: $15 per mile (€8.6/km) N

Parameter list

Parameter options for {{convert}}
Parameter	Value	Description	Note
|abbr=in		Use symbol for first (left-hand side) unit	Symbol ('abbreviation')
|abbr=off		Use name for all units	Symbol ('abbreviation')
|abbr=none
|abbr=on		Use symbol for all units	Symbol ('abbreviation')
|abbr=out		Use symbol for right-hand side unit (default)	Symbol ('abbreviation')
|abbr=unit		Use symbol for all units when using scientific notation	Symbol ('abbreviation')
|abbr=values		Show only input and output numbers, not units	Parts only
|abbr=~		Shows both unit name and symbol	Symbol & name
|adj=mid|…		User-specified text after the input unit; sets adj=on (adjective). Expects 1 unnamed parameter.	Word adding, adjective
|adj=on		Unit name is adjective (singular and hyphenated)	Grammar, adjective
|adj=pre|…		User-specified text before input unit. Expects 1 unnamed parameter.	Word adding
|adj=ri0		Round input with precision 0	Rounding and significant figures
|adj=ri1		Round input with precision 1	Rounding and significant figures
|adj=ri2		Round input with precision 2	Rounding and significant figures
|adj=ri3		Round input with precision 3	Rounding and significant figures
|disp=b		Join input and output using " (...)" (default)	Join values
|disp=sqbr		Join input and output using " [...]"	Join values
|disp=br		Join input and output using "<br/>"	Join values
|disp=comma		Join input and output using ", "	Join values
|disp=or		Join input and output using " or "	Join values
|disp=number		Display output number only	Parts only
|disp=output number only
|disp=out		Display only output number and name/symbol	Parts only
|disp=output only
|disp=preunit|…[|…]		Text to be inserted after value and before units, for both input and output, with optionally different text for output. Expects 1 or 2 unnamed parameters.	Word adding
|disp=table		Output is suitable for a table cell with align="right"	Table columns
|disp=tablecen		Output is suitable for a table cell with align="center"	Table columns
|disp=unit		Display input name/symbol only (not input number, not output)	Parts only
|disp=unit2		Display output name/symbol only (not input; not output number)	Parts only
|disp=x|...		Join input and output using user-specified text	Word adding
|comma=5		Only use comma for thousands separator if 5 or more digits	Number format
|comma=gaps		Use gaps (space), not comma, for thousands separator	Number format
|comma=gaps5		Use gaps (space), but only if 5 or more digits	Number format
|comma=off		No thousands separator	Number format
|frac=N		Show imperial number in fractions, denominator=N	Number format, fraction
|lk=in		Link left-hand side unit name or symbol	Unit link
|lk=on		Link all unit names or symbols (but not twice for the same unit)	Unit link
|lk=out		Link right-hand side unit name or symbol	Unit link
|order=flip		Inverts order of input, output measurements (conversion first)	Order
|round=5		Rounds calculation to the nearest multiple of 5	Rounding and significant figures
|round=25		Rounds calculation to the nearest multiple of 25	Rounding and significant figures
|round=each		In a range, each number is rounded by the default rounding	Rounding and significant figures
|sigfig=N		Round output number to N significant figures (N is a positive integer)	Rounding and significant figures
|sortable=in		Output numeric hidden sort field for use in a sortable table (based on input)	Table sort
|sortable=on
|sortable=out		Output numeric hidden sort field for use in a sortable table (based on output)	Table sort
|sp=us		Use U.S. spelling (like "meter" instead of default "metre")	Spelling U.S. names
|spell=in		Spell input number in words	Spelling numbers
|spell=In		Spell input number in words with first letter uppercase	Spelling numbers
|spell=on		Spell input and output numbers in words	Spelling numbers
|spell=On		Spell input and output numbers in words with first letter uppercase	Spelling numbers
|$=€		Replace $-sign with a currency sign, for example in $/acre (no currency conversion happens)	Cost per unit
|debug=yes		Debugging only. In a sortable table: show the normally hidden sort key	Table sort
|abbr=comma		Deprecated. Use |comma=off	Number format
|abbr=mos		Deprecated. Use |x| or |by|	Range format
|adj=1		Deprecated. Do not use. No need to deviate from regarding plurals	Plural or singular
|adj=flip		Deprecated. Use |order=flip	Order
|adj=j		Deprecated. Do not use. No need to join number and unit with &nbsp;. Not by MOS, and could be misunderstood HTML	Join values
|adj=nocomma		Deprecated. Use |comma=off	Number format
|disp=2		Deprecated. Use |disp=output only	Parts only
|disp=5		Deprecated. Use |round=5	Rounding and significant figures
|disp=flip		Deprecated. Use |order=flip	Order
|disp=flip5		Deprecated. Use |order=flip |round=5	Order, rounding
|disp=nocomma		Deprecated. Use |comma=off	Number format
|disp=u2		Deprecated. Use |disp=unit2	Parts only
|near=5		Deprecated. Use |round=5	Rounding and significant figures

Deprecated options

This list: 

Deprecated options should not be used. They may produce incorrect or undesired results and there is no guarantee that they will be supported in the future.

• abbr=comma is deprecated. Use comma=off instead
• abbr=mos, setting range separators, is deprecated (not compliant). Use |by| or |x| instead
• adj=1 is deprecated. No need to deviate from regarding plurals
• adj=flip is deprecated. Use order=flip instead
• adj=j is deprecated. No need to use NBSP before full unit name. See MOS
• adj=nocomma is deprecated. Use comma=off instead
• disp=2 is deprecated. Use disp=output only instead
• disp=5 is deprecated. Use round=5 instead
• disp=flip is deprecated. Use order=flip instead
• disp=flip5 is deprecated. Use |order=flip |round=5 instead
• disp=nocomma is deprecated. Use comma=off instead
• disp=slash, disp=s, disp=/ are deprecated. Use disp=or instead
• disp=u2 is deprecated. Use disp=unit2 instead
• near=5 is deprecated. Use round=5 instead
• sing= is deprecated in any situation. Use adj= instead
• Range separator |xx| is deprecated (not compliant). Use |x| instead
• Range separator |*| is deprecated (not compliant). Use |x| instead
• Range separator |&| is deprecated. Use |and| instead
• Range separator |to-| is deprecated. Use |to(-)| instead

TemplateData

This is the TemplateData documentation for this template used by VisualEditor and other tools.

TemplateData for Convert

Converts measurements to other units.

Template parameters[Edit template data]

This template prefers inline formatting of parameters.

Parameter		Description	Type	Status
value	1	the value to convert	Number	required
from unit	2	the unit for the provided 'value' Example km	Line	required
to units	3	the unit to convert into Example mi	String	suggested
precision or suffix	4	significant digits after decimal dot or, if negative, exponent of ten	Number	optional
link units	lk	“on” all, “in” input, “out” output or “off” no units Default off Example on	String	optional
abbreviation	abbr	display for the units: “on” unit symbols, “off” all unit names in full words, “in” input unit symbol, “out” abbreviated output units, “unit” both input and output units abbreviated when using scientific notation, “values” no units at all Default off	String	optional
spelling	sp	“us” display U.S. spelling of unit names Example us	String	optional
adjective	adj	adjective form (singular unit name appended by hyphen) “on” or “mid” to put conversion at end Default off Example on	Boolean	optional
conversion	disp	display conversion result: “or” after ‘or’, “x” with custom prefix and suffix, “b” in parentheses, “table”/“tablecen”, “output only” alone, “output number only” alone and without unit, “unit” not at all but input unit; if the value is a number it is used as precision Example b	String	optional
ordering	order	“flip” returns converted value first, input value second. Example flip	String	optional
significant figures	sigfig	number that sets the number of significant figures	Number	optional
rounding output	round	“5” rounds the output number to nearest multiple of 5, “25” to nearest multiple of 25, “each” rounds each number in a range	Number	optional
thousands separator	comma	Sets or suppresses thousand separator in the numbers. “off” = no separator; “gaps”: use space not comma; “5” and “gaps5”: only add separator when number > 5 positions (10,000 or more) Default on Example off	String	optional
sort key	sortable	“on” generates a hidden sort key Example on	String	optional

The above documentation is transcluded from टेम्पलेट:Convert/doc. (edit | history)
Editors can experiment in this template's sandbox (edit | diff) and testcases (create) pages.
Add categories to the /doc subpage. Subpages of this template.